| Customization: | Available |
|---|---|
| Type: | Test Strips & Test Tube |
| Ethylene Oxide Sterilization: | Ethylene Oxide Sterilization |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Theme | Rapid test |
| Certificate | CE0123/ISO13485/FDA |
| Format | cassette/strip |
| Sensitivity | N/C |
| Accuracy | 99% |
| OEM time | 15-35 days |
| Usage | Packing Medical Device |
| Specimen | Whole blood or serum/plasma |
| Storage | 4 °C to 30 °C; Avoid light, avoid hot, not frozen, in dry place. |
| Shelf time | 24-36 month |
Test Instruction
1,Allow the test kit, specimen, buffer, and/or controls to equilibrate to room temperature (15-30°C) prior to testing.
2,Remove the test kit from the foil pouch and use it as soon as possible. Best results will be obtained if the assay is performed within one hour.
3,Place the test device on a clean and level surface. Transfer the specimen by a Disposable Specimen Dropper(or a Pipette):
To use a Hold the dropper vertically, draw the specimen up to the Fill Line as shown in illustration below (approximately 40 µL). Transfer the specimen to the specimen well(S) of the test device, then add 2 full drops of buffer (approximately 80 µL) and start the timer. Avoid trapping air bubbles in the specimen well (S).
4,Wait for the red line(s) to appear. The result should be read at 15 minutes. Do not interpret the result after 20 minutes.
){kind=link}